PDA

View Full Version : RS485

B17fe
03-13-2009, 12:41 PM
Is it possible to use the "RS485 Northstar serial data format" on my Northstar M3 for the ADI II ? It has serial out pins: RS485 A and B in a shielded cable.
This is a used unit I picked up.
TrutrakTech
03-13-2009, 01:44 PM
Steve,

For serial data, our products only use RS232 protocol as it carries the NMEA 0183 stream. Thanks!
B17fe
03-13-2009, 02:22 PM
That will work!
Thanks .... have a great weekend.