Current status of servo service bulletin

[TrutrakTech]

Originally Posted by N65XX

Supreme Overlord Dude: How about numbering the service bulletins, similiar to the other manufacturers, for AP and EFIS. An example for the latest bulletin might be: AP 01-09. It sure would be easier to reference and enter into the mx logs. Just a suggestion, Dan.

Dan, I'll look into that and pass it to my higher ups. The over-overlords! Let's bank on hoping there are minimal service bulletins though!

[TrutrakTech]

The volume of requests seems to have pretty much reduced to a trickle. Very soon we'll take down the webform and just do it by hand either in emails, here, or over the phone. I might look into making a dedicated forum here that only admins/mods can see so that addresses can remain private.

Thanks everyone!

[TrutrakTech]

The requests for the updated servo screws have dwindled down to nearly nothing. Very shortly we will probably remove the service bulletin submission form from the webpage and just go to a manual system. I will set up a thread here for requests. Thanks!

[TrutrakTech]

As soon as we're all up to speed around her this morning we'll take a look at this and see what we can come up with. I'll post back with what we find/figure out/decide/etc. Thanks everyone for the constructive thoughts!

[Joe Casey]

I have the Digiflight II A/P and am told there is a service bulletin on it.
Please send the required parts to:
Joe Casey
4943 Beach St. N. E.
Prior Lake, Mn 55372
(239) 398-6317
jcasey4991@yahoo.com

[TrutrakTech]

This has been superceded by bulletin 060810.